Kverneland 11070 C - 11080 C

Finsnittsvagn med flera användningsområden och lastkapacitet på över 80 m3.

Finsnittsvagn med flera användningsområden

Vår nya finsnittsvagn tar kapacitet till en helt ny nivå, då den ger dig möjlighet att lasta mer än 80 m3.  11070 C och 11080C är även utrustade med ett antal smarta detaljer som underlättar arbetet till max. Till exempel det nya pick up-systemet MaxiFlow med hydraulisk drivlina, ett smart styrsystem baserat på ISOBUS-teknik, fjäderbelastade boggieaxlar och en rejält dimensionerad bottenmatta för snabb avlastning. Vagnen kan även användas som transportvagn, vilket möjliggör flera användningsområden.

Kort översikt av fördelar:

  • MaxiFlow pick-up utan kurvbana för lågt slitage och smidig drift.
  • Ny hydraulisk drivlina för pick up, med pivoterande centrumupphängd avfjädring.
  • 25mm breda inmatningspinnar ger ett effektivt materialflöde .
  • Inmatningsrotor med 800 mm diameter ger hög kapacitet.
  • Snittsystem med 40 knivar.
  • Enkelt underhåll - hela knivenheten fälls ut för enkel åtkomst.
  • ISOBUS-kontroll.
  • Fjäderbelastade boggieaxlar.
  • Rejält dimensionerat band för snabb och effektiv avlastning.

Tekniska specifikationer:

  Lastkapacitet Lastkapacitet i DIN Pick-Up
11070 C 72.8m³ 36.4m³ 1.95m
11070 CD 70.4m³ 35.2m³ 1.95m
11080 C 83.4m³ 41.7 m³ 1.95m
11080 CD 81.0m³ 40.5m³ 1.95m
Kverneland 11080 C

MaxiFlow Pick-Up

  • The new MaxiFlow pick-up features a hydraulic driveline mounted onto the pick-up, without the need for the traditional gearbox and chain drive that limits the flexibility in ground adaptations
  • The hydraulic driveline of the pick-up reduced power requirement by up to 15% compared to the traditional gearbox and chain drivelines.
  • The hydraulic driveline features a centre pivot suspension of the entire pick-up unit that offers transverse adaptation of +/- 100mm on each side of the pick-up unit.
  • The new 2m MaxiFlow pick-up is without cam tracks. The uncontrolled pick-up unit gives less wear compared to a pick-up with cam track steering.
  • The MaxiFlow intake system uses staggered tines on the pick-up, operation in combination with the roller crop press, to deliver a uniform flow of material across the full width of the chopping rotor.
  • Should a blockage occur in the intake system, the new hydraulic driveline allows the  possibility to reverse the pick-up to clear blockages in seconds from the tractor seat.
  • A pressure control valve inside the hydraulic driveline protects the entire pick-up unit from overload and damage, in case of the intake system struggling in heavy crop conditions or  when hitting a foreign obstacle.
  • Intake speed of the pick-up can be adjusted from the tractor seat, allowing the operator to customize speed to current swath size and forward driving speed.

Strong Rotor Design

  • 25mm wide input tines ensure efficient crop flow with a minimum of power requirements.
  • High capacity intake with 800mm diameter rotor.
  • Pre-chopping system with 40 knives.
  • Theoretical chopping lengths of 38mm.
  • Individual spring protection of the knives.
  • The large 800mm diameter rotor is driven by the maintenance-free oil immersed gearbox that ensures trouble-free operation
  • Easy maintenance – the complete knife unit is swung out for easy access.
  • The complete knife unit is easy accessible for daily inspection and maintenance. The
  • chopping unit is simple lowered and swung out.
  • The knives are quickly released without the use of tools.
  • The 25mm wide input tines, arranged in a chevron pattern, move the crop efficiently towards the cutting knives without friction or crop loss.

Boogie Axles

  • The new 11000 series is fitted with a four tonnes hydraulically articulated drawbar designed to bear even the heaviest loads when working with both grass silage and maize
  • The strong and very stable tandem axle offers smooth operation and is designed for safe and fast transport of the crop to the silage clamp or when working off-road in the field.
  • The 11000 series is fitted with parabolic spring loaded boogie axles. The asymmetric mounted springs and wide distance of the suspension ensures that both axles are balanced at any time.
  • This provides even weight distribution with load evenly distributed on all 4 wheels. This makes the 11000 series easier to pull, and reduces soil compaction and tyre wear when operating in the field.
  • The standard level of specification comprises a hydraulic brake system and XXL 700/50R 26.5 tyres, but will accept tyres up to 800mm wide, which significantly reduces ground pressure.
  • The 11000 series is standard fitted with steered wheels, improving manoeuvrability when space is limited. 

Fast Unloading

  • The large dimensioned hydraulic chain-and-slat conveyor is split into two segments and features four heavy duty chains designed to bear even the heaviest of loads.
  • The scraper floor automatically disengages when the chamber is full.
  • Loading and unloading speed is infinitely adjustable and sensors warn via the control box when the chamber is full.
  • The 11000 series offers very fast and efficient unloading of the material. The large tailgate in combination with the adjustable speed of the chain-and-slat conveyor provides very fast unloading of the material so no time is lost.
  • The sensor controlled tailgate is operated hydraulically. The tailgate is mechanically closed and is monitored by two sensors, showing the position on the control terminal.
  • The 11000 series is fitted with three large diameter discharge rollers, which are driven by maintenance friendly driveshaft, to unload the material in a uniform and even mat, reducing the need for evening out the clamp afterwards.
  • The 11000 series features heavy duty side walls made of galvanised powder painted steel plates. The vertical side plates move the material to the rear of the chamber, ensuring a full load.

ISOBUS-kontroll

IsoMatch Tellus GO

  • IsoMatch Tellus GO är en universell ISOBUS-terminal med multifunktionell touchskärm.
  • Utvecklad för snabb och enkel kontroll av alla ISOBUS-redskap och uppgifter.
  • Med den lättanvända applikationen IsoMatch GEOCONTROL är det möjligt att öka effektiviteten, spara tid och pengar. Applikationen inkluderar manuellt körspår, sektionskontroll och variabel giva.
  • Oavsett om den används till gödningsspridare, sprutor eller såmaskiner är precisionslantbruk bara ett klick borta.

IsoMatch Tellus

  • IsoMatch Tellus har dubbla skärmar i en enda terminal.
  • 12" ergonomisk, programmerbar touchskärm, utvecklad för långa arbetsdagar.
  • Med de utökade möjligheterna, att ex. sätta kameror på maskinen, kan användaren ha snittvagnens gränssnitt på övre skärmen och kamerabilden i den nedre.
  • En annan möjlighet är att ha vagnens gränssnitt på den övre skärmen och traktorns på den nedre.